so you can cut the material right where you need to. no sawhorses or struggling with large sheets of plywood, and no lugging heavy tools back and forth to the shop or the garage. the ultra-compact, one-handed design and the fully enclosed blade make versacut one of the safest saws ever. plus, the onboard vacuum attachment makes versacut a no-mess, no-problem tool, so you can work indoors where the job is and save cleanup time. versacut is so innovative, it's been awarded the prestigious editor's choice award by popularmechanics. on the job... in the shop... outside... or around the home. even if you have a whole truckload of heavy power saws, versacut will be the first saw you grab when you're ready to cut and gives you the performance you need to work faster, work safer and make any job easier. now, join home makeover and tool expert steve thomas and do-it-yourselfer jennifer slimko to find out how versacut can pay for itself and give you

professional results the very first time you use it. >> hi, i'm steve thomas. >> hi, i'm jennifer slimko. >> now, you've seen me on television home renovation shows for 20 years and i'm known as a bit of a tool hound. so, i did a quick count and i've got 18 power saws in my own shop. but today i wanna show you an all-new power saw that i think is pretty special. >> it's called versacut and it's a really innovative new power tool from rockwell. >> versacut is designed to do the work of tile saws, circular saws, chop saws and even table saws. >> it's powerful, compact and easy to use. >> and it's truly like having an entire workshop full of power tools in the palm of your hand. >> it feels good, i can tell it's made of quality materials. >> it's got the size of a grinder, the power of a hand saw and it can combine both duties into one. so, it's a space saver, a time saver and it's quite unique. >> versacut is lightweight and easy to use. it's designed so you can cut pretty much anything right on

top of a simple piece of scrap lumber. >> and that's because of this critical feature. i set my depth gauge to three-quarters of an inch and the blade extends exactly three-quarters of an inch. i just let the tool do the work. [whirring, ♪...] [whirring stops] so, i can cut pretty much anything i want, anywhere i want. >> and how about getting rid of some of that cleanup time too, right? just hook up your shop vacuum to the side and let versacut do the cleanup for you. [whirring, ♪...] >> because there's so little dust and mess, versacut is an ideal tool for renovations, indoors or out. >> i've been using tools for 34, 35 years and when you get a tool that's cheap you can tell right away and when you get a tool that's very high quality you can tell right away. and the first time i used the versacut, i could tell right off this is very well made.

if i'm cutting cement board, usually i have to set it up outside and the dust would blow everywhere. with the versacut, i can set it up right in the room, it goes right into the vacuum, less cleanup, less dust. to me that's the only tool to use for cutting cement board now. i will never use anything else for that. the other thing that's really nice about it is how it actually plunges when you cut it, even porcelain, which is a hard tile. in my 35 years as a contractor, i've never seen a saw like the versacut. >> you're going to find yourself using versacut all the time, because it cuts almost anything, so you won't need to lug around or find space for multiple saws. >> right here i've got oriented strand board, plastic, prefinished flooring, sheet metal and plywood. [whirring, ♪...] one down. [whirring, ♪...] through the plastic, prefinished flooring, sheet metal, plywood. nice clean cuts, no need to run back to the truck or shop.

>> there's a carbide tooth wood cutting blade, a high-speed steel blade and here i've got the diamond blade for tile and masonry, so everything's covered. [whirring, ♪...] you saw it on wood, metal, plastic and here on tile. no matter what you need to cut, versacut makes a quality cut the first time, every time. >> announcer: versacut is from rockwell, so you know it's a high-quality, precision instrument. with a compact, balanced design that's less than half the weight of an ordinary circular saw, it's much easier to control. precision depth settings allow you to cut in place on a simple piece of scrap lumber. 3500 r.p.m. of cutting power so it speeds through almost any material. an all-metal plunge base and blade guard that provide 360 degrees of protection. plus a laser guide that helps you get perfect straight cuts every time. and with the three different cutting blades for wood, metal and tile, you're gonna use versacut all the time.

>> check this out: we're going to show you how to take the pain out of cutting plywood sheets down to size. >> this is how versacut really makes your life easier. i'm using my optional track guide, setting it with the cut line indicator and i can make clean, straight cuts in sheet goods like plywood right on the stack. [whirring] >> jennifer: now you're not gonna wrestle with the full-size sheets and no back and forth to the garage, no sawhorses-- simply make the cut. [whirring stops] >> tell me that's not going to save you and your crew time. >> versacut's depth control makes this all possible. with the precision depth setting, i can regulate the exact depth i want the blade to extend from the plunge base. now it's so exact, i can cut the ink off a business card that's only 1/64th of an inch thick. let me show ya. [whirring] [whirring stops] try that with any other saw. right, steve? >> that is unbelievable.

versacut gives you exactly the precision cuts you need, when you need them and where you need them. >> right now i am in charge of maintenance for a 60-unit apartment building. we're currently turning over all the units. we're remodeling kitchens, bathrooms, installing hardwood flooring. there's a lot of work there for the versacut and it's made my job much easier and much faster. by being such a small, compact saw, i can handle it with just one hand, which leaves my other hand to hold down the material and secure it. versacut meets the power standards i need, the size and weight of it are nothing like i've ever seen, it's got a great laser line for ensuring straight cuts and the depth gauge is easy to set, easy to use. it's safer to use as well. it's a great all-around, multi-purpose saw. >> here's something that makes the versacut really unique. i can keep the base stable on the material and make perfect plunge cuts every time. with versacut... [whirring] it's safer... [whirring] it's simpler... [whirring] takes just seconds... [whirring]

and i'm done. [whirring stops, ♪...] whether you're ripping, cross-cutting or plunge-cutting on almost any kind of material, versacut is the answer. >> it's great for contractors on the job or homeowners looking to improve their homes. even if you've never considered taking on a project on your own, versacut makes it easy. >> you want a little more proof? we took versacut out and we crashed a couple of remodeling projects. check it out. >> i inherited all these books not too long ago and haven't really had a place to put them. >> woman: we needed some nice bookshelves to really bring the room together. >> brett: five years ago, i would have hired someone to do this, but i think right now we're all sort of doing our own do-it-yourself projects and this is going to be one of my first ones. i don't think i would have really taken on the project if i didn't have a tool that was as user-friendly as the versacut is. once we had the first couple cuts done, it sort of fell into place. >> this is great. with the versacut we're able to make the cuts inside,

without going back and forth outside. the dust is flying into the vacuum, we don't have dust everywhere, it's minimal mess. it's really convenient. >> brett: once you started seeing it come together, it became very easy. we have an electrical outlet behind where our bookcase is going to be. we don't want to lose access to it, so i'm going to use the versacut to create a cut out. >> nicole: we are so thrilled with the way it turned out. it's exactly the look, it follows the theme that we have throughout our house. it just wraps everything up really nicely. >> brett: we were surprised ourselves on how... what a great job we did. >> nicole: we're really happy with our results. it was a really fun project to take on, to do together. it was a lot of cutting going on and the dust wasn't flying everywhere-- it was really quite clean. >> whether you're working on the job or on your own home, making some minor changes or doing a complete makeover, versacut's gonna help you make your project a whole lot easier. >> you can cut virtually any material you need, from plywood to sheet metal, plastic and pipes, even hardwood flooring and tile. >> get precise cuts in materials right where they are at the

site, so you don't need to lug all those heavy saws to the job or the materials back to the shop. >> jennifer: you can cut hundreds of different types of materials and eliminate setup and cleanup time. now's your chance to get the all-new workshop in one hand: versacut. >> announcer: cut smarter, cut safer. >> i like the safety, the versatility and the light weight. >> announcer: cut wood, metal, and tile, anywhere you want, all with one tool. >> it's lightweight and easy to use, but yet it's got the power of a bigger tool. >> announcer: introducing versacut, the all-new, award-winning design innovation from rockwell, the name known for quality professional tools. created to do the work of circular saws, table saws, chop saws and tile saws, but designed with features those ordinary tools just don't have, so you can get professional, clean cuts in virtually any kind of material, in place, right where you need it.

cut hardwood, plywood, sheet metal and veneers. tile and trim. flooring and siding. p.v.c. pipe, even metal pipe and steel tubing. >> versacut is the most versatile tool that i've seen so far. >> announcer: inside versacut's durable steel housing is a professional grade motor that gives you a no-load blade speed of 3500 r.p.m. the safety and protection of a fully enclosed all-metal blade guard mounted on a plunge base with a precision depth control that allows perfect plunge cuts in almost any type of material. common saws are only designed to cut one type of material. versacut comes with three precision blades, so you can cut all kinds of materials with one saw. ordinary saws are big, bulky and hard to handle. versacut's compact design weighs only four pounds, so it's easy to control with one hand, leaving your other hand free to control the material. old-fashioned saws leave a mess and cleanup time is lost time.

versacut cleans up as it cuts so you don't have to. just attach any shop vacuum to the onboard vacuum port and dramatically cut down dust and debris. >> with the versacut having the vacuum attachment, it sucks 90% of the dust. so your cleanup is minimal. >> announcer: make long cuts, quick cuts, angle cuts, plunge cuts, even cut places other power saws can't reach. versacut is built to make them all easy, every time. it's so innovative, it's the recipient of the prestigious popular mechanics editor's choice award. versacut does the job of your circular saw, chop saw, table saw and tile saw. that's over $900 worth of power tools all in one compact, powerful package that can do jobs those other saws can't handle. but versacut only costs a small fraction of those other power tools. act right now and you can have your very own versacut for only three easy payments of $39.95. that's an amazing value. you'll get the durable, versatile, powerful versacut

power saw, featuring the all-metal blade guard and precision plunge depth setting, the simple-to-use edging guide for long straight cuts, the precision laser guide for perfect cuts every time, the no-mar base plate, universal vacuum attachment and durable carry bag, plus all three versacut blades. the carbide tooth wood cutting blade handles hardwood, softwood, composites and plys; the high-speed steel blade for metal and laminates; and the diamond blade for all kinds of tile, concrete and more. these three high-quality blades alone are worth over $50, but they're included at no additional charge when you order your versacut today. call right now and get the special edition versacut project guide, full of tried and tested home improvement plans that will make your next job easier and add thousands of dollars to the value of any home, yours at no additional charge. call the number on your screen or go online to rockwellversacut.com. get the complete versacut system for only three payments

of $39.95 and see for yourself how much easier your next project can be. call or go online now. [♪...] >> you wanna see how tough versacut really is? concrete's a tough material. let's see how it does. i'm gonna set it full depth. [whirring, ♪...] cutting 4,000-p.s.i. concrete like this is a job that would put a heavy load on any saw. [whirring stops] versacut took it on with no problem. and with the vac attachment, even the dust is handled. >> and check this out. i can even make a quick cut through one-inch tube steel. [whirring, ♪...] that's the pro-grade motor at work-- versacut is tough enough

to handle it. it does the work for me. >> announcer: make your next job-- no matter how tough it is-- easier and faster with versacut. eliminate setup time: just drop what you're cutting on a piece of scrap wood. with versacut, you're done before you could even get another power saw off your truck. work faster, work safer, work easier, with the workshop in one hand: versacut. [♪...] >> check this out. the boys in the back put a little something together to show how easy versacut is to use in any position. it's a scale model of a room. you've got your floors, of course, your walls and ceiling-- any position you need to work in, versacut can do the job. >> steve: now, my first job is to finish off the prefinished flooring. i can work right in place because of the depth control feature on this saw. working on a piece of scrap lumber, drop it into place and then the last step would be the base board. >> got it. versacut works in place, so you can save time and get the job done faster. >> next job is to cut a hole for

a register in the wall here and with the laser, i can see where i'm going. [whirring, ♪...] >> jennifer: and now you're ready to put in the new return. >> there you go, not bad. >> not bad at all. >> last job is to repair some damage in the ceiling here caused by water. [whirring, ♪...] [whirring stops, ♪...] and the water damage is gone.

>> no other power saw could handle all these jobs; on the floor, on the wall, even overhead on the ceiling. done, done and done, only with versacut. >> steve: powerful, versatile and precise. that's why versacut's the first saw i'm gonna reach for when i start a job and that's not just what i think. >> we took versacut to the skillsusa national leadership and skills conference in kansas city, where the best of the best come to compete and learn about the newest construction tools and technologies. >> these guys have zero mercy, and they'll tell you exactly what they think about a tool, so let's see how versacut did. [whirring, ♪...] >> wow, that's a fantastic tool. it's nice and light. >> man 2: i've never used anything like this. it's really new, it's different. i like it. it's a new idea. >> man 3: this is nice and compact for detailed work, so i think that's a big advantage. homeowners could use it. professionals could use it. i can see tile setters using it, a lot of flooring people. >> i like that.

i like that a lot. whether it's a homeowner, a contractor, a d.i.y.-er, lots of people could use the versacut. even i could use the versacut. >> i like the size of the blade. it's something that's lightweight and easy to use, but yet it's got the power of a bigger tool. i think i'm going to ask my wife to get me one for christmas. >> jennifer: just like the guys out in kansas city, when you pick up a versacut, you'll see how much easier it'll make your next project. >> versacut is lightweight and easy to use. it's designed so you can cut pretty much anything right in place on top of a simple piece of scrap lumber. >> take a minute right now, call and have a versacut delivered right to your front door. >> announcer: introducing versacut, the all-new, award-winning design innovation from rockwell, created to do the work of circular saws, table saws, chop saws and tile saws, so you can get professional, clean cuts in virtually any kind of material, in place, right where you need it. make long cuts, quick cuts,

angle cuts, plunge cuts, even cut places other power saws can't reach. versacut is built to make them all easy, every time. versacut does the job of your circular saw, chop saw, table saw and tile saw. that's over $900 worth of power tools all in one compact, powerful package, but if you act right now, you can have your very own versacut for only three easy payments of $39.95. you'll get the durable, versatile, powerful versacut power saw, the simple-to-use edging guide, the precision laser guide, the no-mar base plate, universal vacuum attachment and durable carry bag. plus all three versacut blades: the carbide tooth wood cutting blade, the high-speed steel blade and the diamond blade. these three high-quality blades alone are worth over $50, but they're included at no additional charge when you order your versacut today. call right now and get the special edition versacut project guide, yours at no additional charge. call the number on your screen or go online to

rockwellversacut.com. get the complete versacut system for only three payments of $39.95 and see for yourself how much easier your next project can be. call or go online now. >> the more you use versacut, the more uses you're gonna find for it. let's say you're remodeling your kitchen or bathroom, you're going to be making a lot of cuts in a lot of materials in a pretty small space. you'll probably be using some tile, and with the vac attachment, you can cut it in place and it doesn't make a mess. [whirring] [whirring stops] clean cut, no dust. pressed tin is a popular material both for ceilings and for backsplashes. trouble is, it's tough to cut. but with the high-speed steel blade, the no-mar base and the laser guide, makes it a snap. [whirring] [whirring stops]

that looks cool, i like it. another material you'll be using a lot of in a renovation is cementitious backer board. this goes under tile. trouble is it makes a lot of dust when you cut it, so you tend to have to haul it outside. with the vac attachment, you can cut it inside right on the stack. i'll be using this optional track guide. it's got this rubber on the bottom so it doesn't slide around and i can cut it right in place. [whirring] [whirring stops] love the fact that you get the clean cut and no dust. that is really great. [♪...] >> jennifer: versacut makes all your kitchen and bathroom remodels easier. from notch-cutting tile, to easily cutting through p.v.c. pipe, copper pipe, even use plunge cutting for bathroom or kitchen sinks. get the job done that much faster all with one saw: the workshop in one hand-- versacut.

>> i've been doing home repair work for the better part of 15 years. i've worked on probably well over 100 homes in all capacities from foundation work to trim work. when i grab the versacut, the first thing that i like is the balance. i can tell it's made of quality materials. one of the nice features about the versacut saw is the depth setting. snap it down, i'll be good to go. on a regular circular saw, i'm having to bend over the saw, look down, find the right measurement and this, it's right here. i turn it to my face, it's easy, i don't have to bend over. the carbide tip blade for cutting wood makes short work of plywood. one-bys, pine, it's no problem for this blade. it's a good quality blade. the versacut saw saves me time, saves me money. >> versacut is a professional tool, one that is so compact and packed with features, you'll find yourself using it all the time. >> whether you're a first-time user, an experienced do-it-yourselfer or a contractor that needs to save time, you're gonna love the versatility, the safety, the value and the professional quality of versacut. here at the connelly house,

flooring contractor gary boyles has been hired to renovate the bedroom. problem is, he's working on the second floor and he's only got one day to get the job done. >> with the versacut i'm able to stay right here and make my cut, opposed to grabbing a board, running down the stairs, cutting it, come back up. the versacut is a lightweight circular saw that fits in your hand. it has a laser light to guide you down your lines that you're gonna cut. >> one of my favorite features about the versacut is that you can set the depth on the saw, cut directly on the subfloor and then you can continue and move on to your next board. >> gary: you can hold it with one hand and you don't get the twisting from the torque out of it. you can control it a lot better. it's very easy to handle. it can take a two-day job and turn it into a one-day job. it's a very, very practical tool to use. [♪...] >> jason: we cut the hardwood flooring, we cut the m.d.f. baseboard, we cut all the transition mouldings. we could have cut much more, but that's all of the products we needed for this job. with the versacut there is very, very little dust. you have a vacuum attachment.

a lot less work running up and down the stairs; you're not tracking the dust through the customer's home. i think the versacut should be in every contractor's tool supply because it is a great tool to have, very versatile, and it can be used in any situation. [♪...] >> when you're starting up your next project, you want to know that you've got the best quality tools in your garage or your shop. >> versacut is a contractor-quality cutting tool. you can handle almost any material right where you're working, so you're saving time and hassles. >> you've got greater control over your work and you're working safer and that's really peace of mind. >> no matter what you need to cut, versacut has got you covered and no matter what your skill level, versacut's going to make your job easier. >> you're going to be able to make the right cuts the first time, every time. versacut is a workshop in one hand. call now and get your own versacut before you start your next job. >> announcer: cut smarter, cut safer. >> i like the safety, the versatility and the light weight. >> announcer: cut wood, metal,

and tile, anywhere you want, all with one tool. >> it's lightweight and easy to use, but yet it's got the power of a bigger tool. >> announcer: introducing versacut, the all-new, award-winning design innovation from rockwell, the name known for quality professional tools. created to do the work of circular saws, table saws, chop saws and tile saws, but designed with features those ordinary tools just don't have, so you can get professional, clean cuts in virtually any kind of material, in place, right where you need it. cut hardwood, plywood, sheet metal and veneers. tile and trim. flooring and siding. p.v.c. pipe, even metal pipe and steel tubing. >> versacut is the most versatile tool that i've seen so far. >> announcer: inside versacut's durable steel housing is a professional grade motor that gives you a no-load blade speed of 3500 r.p.m.

the safety and protection of a fully enclosed all-metal blade guard mounted on a plunge base with a precision depth control that allows perfect plunge cuts in almost any type of material. common saws are only designed to cut one type of material. versacut comes with three precision blades, so you can cut alkinds of materials with one saw. ordinary saws are big, bulky and hard to handle. versacut's compact design weighs only four pounds, so it's easy to control with one hand, leaving your other hand free to control the material. old-fashioned saws leave a mess and cleanup time is lost time. versacut cleans up as it cuts so you don't have to. just attach any shop vacuum to the onboard vacuum port and dramatically cut down dust and debris. >> with the versacut having the vacuum attachment, it sucks 90% of the dust. so your cleanup is minimal. >> announcer: make long cuts, quick cuts, angle cuts, plunge cuts, even cut places other power saws can't reach. versacut is built to make them

all easy, every time. it's so innovative, it's the recipient of the prestigious popular mechanics editor's choice award. versacut does the job of your circular saw, chop saw, table saw and tile saw. that's over $900 worth of power tools alin one compact, powerful package that can do jobs those other saws can't handle. but versacut only costs a small fraction of those other power tools. act right now and you can have your very own versacut for only three easy payments of $39.95. that's an amazing value. you'll get the durable, versatile, powerful versacut power saw, featuring the all-metal blade guard and precision plunge depth setting, the simple-to-use edging guide for long straight cuts, the precision laser guide for perfect cuts every time, the no-mar base plate, universal vacuum attachment and durable carry bag, plus all three versacut blades. the carbide tooth wood cutting blade handles hardwood, softwood, composites and plys;

the high-speed steel blade for metal and laminates; and the diamond blade for all kinds of tile, concrete and more. these three high-quality blades alone are worth over $50, but they're included at no additional charge when you order your versacut today. call right now and get the special edition versacut project guide, full of tried and tested home improvement plans that will make your next job easier and add thousands of dollars to the value of any home, yours at no additional charge. call the number on your screen or go online to rockwellversacut.com. get the complete versacut system for only three payments of $39.95 and see for yourself how much easier your next project can be. call or go online now. [♪...] the preceding has been a paid advertisement for versacut, brought to you by rockwell.

>> announcer: the following is a paid program for the ninja mega kitchen system, brought to you by euro-pro. what in the world is happening to us? 72 million of us are overweight or obese. there's epidemic diabetes among our kids. we're getting sick and dying from eating too many foods that are overprocessed, low in nutrients and fiber and high in fat and calories. >> when i weighed 360 pounds, you know, it's the old adage, "you are what you eat," and i was eating garbage and my health was garbage. and when i changed how i ate and how i treated my body, my entire health changed. i think the reason that a lot of people don't eat healthy is because it's not convenient, and the wonderful thing about the ninja is it makes it convenient.